If you are an aspiring electric guitar player, then you have probably heard of the classic rock song ‘Smoke on the Water’. This iconic song has been played by countless guitarists since it first came out, and it is a great way to learn some basic electric guitar techniques. In this tutorial, we will show you how to play ‘Smoke on the Water’ on electric guitar. We will go through everything step by step, from the basic chords to playing the whole song. With a little practice and dedication, you will be able to play this classic rock anthem just like a professional!”Smoke On The Water” is a classic rock song by the British rock band Deep Purple. It was released in 1972 and became an instant hit. The song is easily recognizable due to its iconic electric guitar riff, which has inspired generations of guitar players. Learning to play this riff on electric guitar is an essential skill for any aspiring rock guitarist. This tutorial will provide an introduction to playing “Smoke On The Water” on electric guitar, with tips on technique and fingering as well as advice for tackling the solo sections.
Learning The Basics Of Smoke On The Water
Smoke on the Water is one of the most iconic and recognizable rock songs of all time. Written by Deep Purple back in 1972, it has been covered by countless bands and is a must-know song for any budding guitarist. Learning the basics of Smoke on the Water can be a great way to get your feet wet with playing popular rock songs.
The first thing to understand about Smoke on the Water is that it is in a standard 12-bar blues progression, making it easy to learn and play. The song follows a basic I-IV-V chord progression that moves from A minor to D major to E major. Knowing these chords will make it easier to figure out the rest of the song.
Once you have the chords down, you can start learning how to strum along with them. The basic rhythm for Smoke on the Water uses eighth notes with some variations thrown in for flavor. It’s important to practice this rhythm until you feel comfortable playing it at tempo. You may also want to practice some variations of this rhythm as well, so you can add some flair when you play live.
The next step in learning Smoke on the Water is figuring out how to play the lead guitar part that makes this song so iconic. This part consists of two lines – an ascending line followed by a descending line – which are played over each chord in the progression. It can be tricky at first but with some practice, you should be able to get it down pretty quickly. Once you have this part down, you’ll be able to start playing along with other musicians or even lead your own band!
Finally, it’s important to practice playing Smoke on the Water with other musicians so that you can get comfortable performing it live and really make it sound like your own version of this classic rock song! With just a few basic chords and some simple soloing techniques, learning Smoke on the Water isn’t as hard as it may seem – once you get started, you’ll find yourself rocking out in no time!
Smoke On The Water Riff
The classic rock riff of Smoke On The Water is one of the most famous riffs in music history. It is instantly recognizable and easy to play. This riff has been covered by many musicians over the years, and it is a great way to get started playing guitar. The riff itself is relatively straightforward, but it does have some tricky parts that require practice in order to master. Here are some tips on how to play the Smoke On The Water riff.
The Smoke On The Water riff begins with an open G chord on the third fret of the 6th string. This chord should be played first with your index finger on the third fret, and then with your ring finger on the fourth fret. From there, you will want to move up two frets and play an A chord with your index finger on the fifth fret and your ring finger on the sixth fret. Finally, you will want to move down two frets and play a D chord with your index finger on the third fret and your ring finger on the fourth fret.
Once you have mastered this basic progression, it’s time to start playing some notes over it. To begin playing over this progression, you will want to start by playing a G note on the fifth string at the seventh fret with your index finger followed by a B note on the fourth string at the seventh fret with your middle finger. Then move up two frets and play an A note with your index finger followed by a C# note with your middle finger. Finally, move down two frets again and play a D note with your index finger followed by an F# note with your middle finger.
Once you have mastered this basic pattern, it’s time to add some extra flavor to it by adding some slides and bends into each phrase. This can be done by sliding from one note up or down two frets or more before hitting each note in the pattern. You can also add some vibrato into each phrase by bending each note slightly up or down before hitting each one in succession. With practice, these techniques can help create a more expressive sound when playing Smoke On The Water riff.
How To Play The Chords Of Smoke On The Water
Smoke On The Water is one of the most iconic rock songs of all time. It has been covered by numerous bands and musicians over the years, and it is an easy song to learn how to play. The chords for Smoke On The Water are simple and can be played on both electric and acoustic guitars.
The chords used in Smoke On The Water are G, D, A, E minor, and F. To play them on an electric guitar, use your first finger on the sixth string (low E string) for the G chord; your second finger on the fifth string (A string) for the D chord; your third finger on the fourth string (D string) for the A chord; your fourth finger on the third string (G string) for the E minor chord; and your first finger on the second string (B string) for the F chord.
On an acoustic guitar, you can use a capo to help make it easier to play these chords. Place your capo at fret three (on any fret at least two frets higher than where you would normally place it). Then use your first finger on fret five of the sixth string for G; second finger on fret four of the fifth string for D; third finger on fret three of fourth string for A; fourth finger on fret two of third string for E minor; and first finger on fret one of second string for F.
Once you have learned how to play these chords, you can practice strumming them with a steady rhythm while singing along with or without lyrics. You can also try adding some variation to make it more interesting. Experiment with different strumming patterns until you find something that works best with this song.
Smoke On The Water is a great song to learn if you want to get familiar with playing basic chords on guitar. With some practice and patience, you will soon be able to master this classic rock anthem!
Using Open Chords to Play Smoke On The Water
Playing Smoke On The Water is a great way to practice your open chords. You can use the open chords to play the main riff of the song, which consists of three E chords, followed by a G chord and an A chord. To play this riff, you will need to start with your index finger on the low E string (6th fret), then move up to the A string (5th fret) with your middle finger, and then move up again to the D string (7th fret). This will give you an E major chord. From there, move up to the A string (5th fret) with your pinky finger and then back down again to the low E string (7th fret) for a G major chord. Finally, move back up to the A string (5th fret) with your middle finger for an A major chord. Once you have mastered this pattern, you can use it as a starting point when playing Smoke On The Water.
Using Barre Chords To Play Smoke On The Water
Barre chords are a great way to expand your repertoire when playing Smoke On The Water. To play this song using barre chords, start by placing your index finger across all six strings at the fifth fret. This will give you an A major chord. Next, place your second finger on the sixth fret of the D string and third finger on the seventh fret of the B string for a D major chord. Finally, place your fourth finger on the seventh fret of the G string and fifth finger on the sixth fret of high E string for an E major chord. Once you have mastered this pattern, you can use it as a starting point when playing Smoke On The Water.
Using Power Chords To Play Smoke On The Water
Power chords are another great way to learn how to play Smoke On The Water. To play this song using power chords, start by placing your index finger on the fifth fret of both low E and A strings simultaneously for an A5 power chord. Next, place your second finger on both B and high E strings at sixth fret for a D5 power chord. Finally, place your third finger across both low E and high E strings at seventh fret for an E5 power chord. Once you have mastered this pattern, you can use it as a starting point when playing Smoke On The Water.
Practice the Riffs
When learning to play Smoke on the Water, the most important thing to do is to practice the riffs. Start by playing them slowly and gradually build up your speed. You can also try playing each riff in different ways, such as using different rhythms or different chords. This will help you get a better feel for the song and make it easier to play it correctly. Once you are comfortable with the riffs, you can start adding in other elements like solos or fills.
Get Familiar with the Chords
Once you have mastered the riffs, it’s time to focus on the chords. Get familiar with all of them so that you can transition from one to another smoothly. It’s also important to understand how each chord fits into the overall song structure so that you can create a cohesive performance. Pay attention to how each chord is voiced and try to recreate that sound as accurately as possible when playing live or recording.
Listen and Analyze
Another great way to learn Smoke on the Water is by listening and analyzing recordings of other musicians playing it. Listen closely for any nuances they may be incorporating into their performance and take note of any techniques they use that stand out. You can even break down their performance into sections and learn each part separately before attempting it yourself. This will help you gain a better understanding of how a professional musician approaches this classic rock song.
Record Yourself
Once you feel comfortable with your playing, record yourself performing Smoke on the Water so that you can go back and listen for areas where improvement is needed. This will also allow you to practice your timing and dynamics since there won’t be anyone else around when recording yourself at home or in a studio setting. You should also mix in some improvisation when recording so that your performance sounds fresh and unique when compared to other versions of this classic rock song
Alternative Versions Of Smoke On The Water
Smoke on the Water is one of the most iconic rock songs of all time, written by Deep Purple in 1971. It has been covered by countless artists in a variety of genres and styles, each bringing something new to the classic track. Here are some alternative versions of Smoke on the Water that you should check out:
The First Instrumental Version – This version was recorded by Duane Eddy in 1973 as a tribute to Deep Purple. It was an instrumental take on the classic track, featuring Eddy’s signature twangy guitar licks and a jazzy piano solo from keyboardist Steve Miller.
The Jazz Version – In 1995, jazz-fusion group Return to Forever recorded an uptempo version of Smoke on the Water with Chick Corea on keyboards and Stanley Clarke on bass. Their version features an extended jam section with solos from each member of the band, giving it a unique jazz-rock sound.
The Punk Version – In 1998, punk band NOFX released their own take on Smoke on the Water as part of their album White Trash Two Heebs and a Bean. This version is much faster than the original and features lead singer Fat Mike’s signature raspy vocals and lots of distorted guitars.
The Reggae Version – In 2005, reggae artist Toots & The Maytals released their own interpretation of Smoke on the Water as part of their album True Love. This version is much slower than the original and features Toots’ soulful vocals backed up by a skanking rhythm section and plenty of horns.
No matter what genre or style you prefer, there is sure to be an alternative version of Smoke on the Water that you will enjoy!
Understanding Effects That Work Well With Smoke On The Water
Smoke on the Water is one of the most iconic rock songs of all time, and it has been covered countless times by hundreds of bands. It is a great song to learn for guitarists, and it can be used as a springboard to explore different effects, textures, and genres. There are many effects that work well with Smoke on the Water, but some stand out above the rest.
Reverb is one of the most commonly used effects for any type of music. Adding a touch of reverb to Smoke on the Water can add depth and texture to the song and make it sound much more interesting. Reverb can also be used to create a more ambient soundscape that allows for more sonic exploration.
Delay is another effect that works well with Smoke on the Water. Delay can be used to create a more ethereal sound, as well as add an extra layer of complexity to the song. Delay can also create an interesting texture when used in conjunction with other effects such as reverb or chorus.
Chorus is an effect that adds dimension and movement to any musical piece, and it works especially well with Smoke on the Water. Chorus adds layers of depth and complexity to the song by creating a lush soundscape that envelops listeners in its beauty.
Distortion is another effect that works well with Smoke on the Water. Distortion adds an edge to any song, and it gives Smoke on the Water an extra level of intensity that makes it stand out from other versions. Distortion also works well when combined with delay or chorus, creating a unique texture that will make your version truly stand out from others.
Overall, there are many effects that work well with Smoke on the Water, but some stand out above the rest. Reverb, delay, chorus, and distortion are all great options for adding depth and texture to your version of this classic rock anthem. Experimenting with different combinations will help you find your own unique soundscape for this timeless classic!
Conclusion
Playing Smoke on the Water on electric guitar is a great way to add an iconic sound to your repertoire. With just a few simple chords and scales, you can easily master this classic song. Whether you’re playing it in your bedroom or in front of a live audience, this classic song will never fail to impress.
If you’re looking for other ways to improve your guitar playing, consider learning some basic improvisation techniques. Improvising solos over Smoke on the Water can help you expand your musical creativity and add more depth to the song. Additionally, you can use different variations of the same chord progression to create interesting variations of the original song.
With practice and dedication, anyone can learn how to play Smoke on the Water on electric guitar. Good luck!